All you need to do is press on this piece of plastic from the inside of the back cover. The only thing you need to do on the original blink xt cameras is to unscrew the one screw which keeps the camera to the floor.
Your blink camera comes with a mounting bracket and a screw.
Removing blink camera from mount. While holding the mount in both hands apply pressure to the outer ring while supporting the mount with the opposite hand. The desktop cieling mount opening 2 is at the bottom of the unit. Blink lightweight wireless cameras are easy to mount securely.
You may even unclip the device from the base which stays in the wall. Select a location to mount your camera where moving shadows and reflections will not interfere with the image. Mounts from other blink cameras also fit the mini.
To remove the bracket from the camera it should just snap right off similar to how it was attached. Mounting your blink camera. While doing this pull up on the battery cover with your thumb.
This may require some force as the camera is air tight. Slide and hold that in the direction of the arrow. If you want to mount the mini on a ceiling or overhead surface be aware that the image can be flipped in the blink app camera settings.
Put the camera in a safe place where the lens will not be scratched. This way once the mount is attached or once your blink xt camera is mounted outdoors you can remove it to replace batteries. To remove the camera hold the mount still and pull the bottom of the camera away from the mount.
Lift the battery cover off of the camera. If you need any further assistance feel free to reach out. If you feel daring you can also unclip the camera from the base that is attached to the surface.
Then use the included screws to secure the mount to your surface. It works similarly in the new blink xt camera mounts. Two screws are included in the box.
How to remove a blink xt camera mount. To begin mounting your blink camera please remove the back cover of the unit. On the original blink xt cameras the only thing you need to do is unscrew the one screw holding the camera to the surface.
Similarly it functions in the mounts of the current blink xt phone. After the mount is secured press the cable into the molded clips in the base. Hold the camera and pull the mount from the camera.
Hi ymets2k02 sorry for not responding sooner. The two provided screws are wood screws. The mount riser is used to increase the distance from the mounting surface to the camera allowing for a wider range of motion when positioning the camera.
The wall mount opening 1 is located above the usb port at the rear of the camera. You ll notice a grey switch with an arrow facing toward the bottom of the camera. Hold the camera so that the back is facing you.
Your blink xt2 comes with a camera mount mount riser and two screws in the box. Your blink camera comes with a right angle adapter opening tool and cone shaped camera mount matching the color of your camera body. It is possible to remove the camera from the mounting bracket.
Nick at blink july 22 2017 6 38am 2. Flip over the camera backplate there is a circular piece of plastic that needs to be removed.