A 144 gp 9 water mill setup. When placed in a body of water it must be underwater and connected with wires to an eu storage device ic2 machine in order for it to transmit power.
The water mill is a generator from industrialcraft 2 that uses water as a fuel.
Ic2 water mill. 0 010 eu t per block of adjacent water. There are two ways that it can generate power. The water mill is a block added by extra utilities 2.
The water mill is an ic2 generator that produces eu by either having a water bucket placed in its lower slot or being placed in a body of water. The red blocks are where water source blocks are. It will generate gp grid power on the presence of flowing water adjacent to the sides of the block.
Each water mill gives 16 gp in this setup. The water mill is filled manually by placing water buckets or a water cell in the lower slot. In the 1 12 version of.
The water mill will charge the battery or output power at a rate of. It can either be placed directly adjacent to water source blocks or water fluid containers i e buckets cells can be placed in its gui. The water mill will charge the battery or output power at a rate of.
For other uses see water mill. 1 eu t a single water unit produces 1000 eu and the water mill can store 4 water units worth of water. The water mill is submerged in water optionally an re battery can be placed in the upper slot.
The water mill is submerged in water. This page is about the water mill added by extra utilities 2. Optionally an re battery can be placed in the upper slot.
The water mill has two modes of operation.