And the shop warned me that they run about 1 2 inch wider per tire than falken 615 s or kumhos xs s. Burn619 premium member.
Fender rolling can easily be done either at home or at a shop.
Diy fender rolling. First 2 of 2 go to page. Did some research and it came out great. Diy fender rolling w tool.
Hey wastedonanime how much camber did you give the rears. Joined feb 16 2005 962 posts 21 oct 2 2007. Leofenderrolls teaches us how to roll fenders and do it properly.
This is a video on how to do it yourself fender rolling on the cheap for tire clearance. I made dremel cuts into the fender about every 2 3 inches. My new toyo rir 225 45 16 fronts will be here mon.
Rolling your fenders at home is easy as long as you don t rush it. Please excuse 2 22 where i say smaaaaaller i had a brain fart. I had to change height frequently while rolling to get everywhere the 240 fender isn t exactly a circle but more of an oval.
Then hammered the pieces i cut up. Attach the fender roller use the supplied adapters and your stock lug nuts to attach the fender roller the orange knob in the middle of the arm adjusts the height of the roller. The key is a lot of heat from a heat gun and making several gentle passes and not forcing.
The corrected bat method first i ve seen a ton of crazy methods for rolling your fender. I went 2 5 and it seems to be good. However if you re like us and love working on your own car this diy fender rolling project is going to be very rewarding.
Lol follow my instagram stancedx720 if you like drifting or mini trucks or even both i su. I watched all the youtube videos of some guy messing it up with a floor jack handle to some crazy asian going at his pink honda with a ball point hammer to some guys wedging a bat between the wheel and fender and then driving slowly. Diy cheap fender rolling no bat rear fenders were the easiest.
Diy fender rolling. Jump to latest follow 21 24 of 24 posts. I m curious about fender rolling and can t find a diy.
After i was done i painted the inner lip that was now flush with plasti dip to prevent rust on the places i had cut and chipped the paint off with the hammer and dremel. I decided to make a video o. They also told me that they may not be able to put them on the car due to liability issues but will mount them if i bring just the wheels in.