You must remove the stopper to clean the drain so the stopper moves. There are usually five main types stuck in closed position.
Problems with this type are usually signaled when the pop up stopper fails to push up enough to open the bathtub drain it wants to stay in the closed position constantly.
Bathtub drain stopper stuck in closed position. Press it until the putty comes out and remove the excess. When gunk builds up inside the drain it could cause the bathtub drain stopper to become stuck in the open or closed position. Toe touch push pull lift turn pop up plunger style trip lever.
There are many good ways are to replace your bathtub drain stopper stuck in a closed position and can troubleshoot. Press the replacement drain in the opening on top of the putty. Cover your tub s finish with an old rag or towel.
Replace the drain with the gaskets between it and the nut and tighten the nut to hold the drain in place. Use the plumber s putty to make a ring around the sink opening and press down gently. Whatever issues are there in your bathtub drain stopper first you have to figure out.
Figure 1 types of bathtub drain stopper. Make sure that the drain stopper is into the closed position on down so that it will not turn anywhere while you are doing your job. Get the channel lock.
You will need a channel lock and nose plier to remove this kind of bathtub drain stopper stuck in closed position. Though all types of bathtub drain stopper serve the same purpose you must identify your drain stopper type so that you can remove it properly. The bathtub drain stopper may not hold the water very well when it is not flush with the bottom of the tub and have to make bath time a hassle.
The cause here is usually because the connecting rod attached to the trip lever has become shortened from use.